Skip to main content

Cozmo is programmable

The incredibly cute robot Cozmo became even more engaging recently with the ability to program it. A recent update to the Cozmo app (see related links) to include Code Lab allowing programming of Cozmo through of a graphical programming approach based on Scratch Blocks.

An example of the code is shown below, getting Cozmo to:

  • Start moving around
  • Wait until it see a face
  •       Says Hi Everybody 
  •       Moves forward
  •       Sounds like a cat
  •       Looks down and then raises it's forks
  •       Acts 'grumpy'
  •       Acts 'happy'

The video at the end shows this in action.

It is an easy to use tool and with a lot of the Cozmo actions available in the blocks, put a few blocks together and very quickly you have Cozmo doing some interesting and often funny actions. Is it very flexible, no; but it is not meant to be - it is meant to be easy to use and it is and great fun. Personally, I felt the app needed this addition, it adds the element to take this toy further into a coding toy (yes another one) that it feels, to me, it should be.

Related posts
Cozmo-Wall-E has a rival
Cozmo is coming to the UK
Android app
iPad app

All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with. Twitter @scottturneruon

Popular posts from this blog

Micro:bit, Servo control with Micropython or blocks

You can control servos (small ones) from a Micro:Bit directly. Following a link from the David Whale (Twitter ) , thank you, took me to a Kitronik blog post,, which has the answer.

The code uses Microsoft Blocks taken from the post, runs the servos 180 degrees and back again, when button A is pressed. It does exactly what it should. I am also using the Tower Pro SG90 servo.
Can it be replicated in Micropython? This is a new mini project, there seems to be little out there yet on how do this but the best so far is this video by PHILG2864:

The closest I have is the following, it is essentially there.
from microbit import *
while True:

Setting the time period to 20ms  pin0.set_analog_period(20)seems by experiment (and used in the video above) to be best value so far. The reason for pin0.write_analog(1)  set to 1 i…

mbots - graphical programming and Arduino

Makeblock ( funded through Kickstarter the development of a new robot - mBot ( with the subtitle "$49 educational robot for each kid". What they came up with is a interesting system that uses their mBlock software, which resembles Scratch but produces code for Arduino, to program a robot with LEDs, light sensors and buzzer integrated on the main board; but also comes with sensors for line-following, ultrasonic sensor and with the version in the kickstarter reward a 16x8 LED matrix.

My impression so far it is really quite intuitive to work with, in the example above the robot:

moves forward;displays 'f' on the LED matrix; turns right;displays 'r' on the LED matrix;repeats until the on-board is pressed to stop the motors. 

What I like most though is seeing the graphical code turned into Arduino code - the potential to see the same thing done into two ways…

4Tronix Bit:Bot Neuron Controlled Edge follower

In thelast post I was playing with 4Tronix'sBit:Bot. In this post I will show the initial experimentation with an artificial neuron controlling the Bit:Bot to follow the edge of a line (it follows the left-hand side of the line).

The neurons (well two separate ones, S1 and S2) are produced using weighted sums - summing the weights x inputs [ right-hand sensor (rs) and left-hand sensor (ls)] plus a bias for each neuron in this case w[0] and w[3].

    net=w[0]+w[1]*rs+w[2]*ls           net2=w[3]+w[4]*rs+w[5]*ls

  If weighted sum >=0 then its output 1 otherwise 0 if net>=0:          s1=1     else:         s1=0
    if net2>=0:         s2=1     else:         s2=0
What actual causes S1 to be either 1 or 0 is all defined by a set of weights w (three for the first neurone, S1,  three for S2).

Converting the outputs of the two neurones S1 and S2 into actions is shown below.