Skip to main content

Raspberry Pi - Python Junkbot



Junkbots (http://junkbots.blogspot.co.uk/) are based around using  materials such as drink's cans, broken propellors and motors to produce something that moves by vibration. Previous designs be found at:



The latest tweak to the Raspberry Pi based Junkbot design is to use the combination of Python and Pimoroni's Explorer HAT PRO to control it. Explorer HAT Pro is a good choice, it can control two motors with a library provided to simplify the programming. For this the Junkbot was the one shown above: a drinks can, pen, LEGO bits, motor and broken propellor.

Before the Explorer HAT can be used the library needs to be installed via the Terminal and the instructions below

curl get.pimoroni.com/explorerhat | bash

Python code to control the junkbot is shown below.


import explorerhat
from time import sleep

def spin1(duration):
    explorerhat.motor.one.forward(100)
    sleep(duration)
    explorerhat.motor.one.stop()

def spin2(duration):
    explorerhat.motor.one.backward(100)
    sleep(duration)
    explorerhat.motor.one.stop()

spin1(1)
spin2(1)

Essentially the code spins the junkbot one way and then the other.





All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with.

Popular posts from this blog

Micro:bit, Servo control with Micropython or blocks

You can control servos (small ones) from a Micro:Bit directly. Following a link from the David Whale (Twitter ) , thank you, took me to a Kitronik blog post, https://www.kitronik.co.uk/blog/using-bbc-microbit-control-servo/, which has the answer.

The code uses Microsoft Blocks taken from the post, runs the servos 180 degrees and back again, when button A is pressed. It does exactly what it should. I am also using the Tower Pro SG90 servo.
Can it be replicated in Micropython? This is a new mini project, there seems to be little out there yet on how do this but the best so far is this video by PHILG2864:



The closest I have is the following, it is essentially there.
from microbit import *
pin0.set_analog_period(20)
while True:
    pin0.write_analog(180)
    sleep(1000)
    pin0.write_analog(1)
    sleep(1000)

Setting the time period to 20ms  pin0.set_analog_period(20)seems by experiment (and used in the video above) to be best value so far. The reason for pin0.write_analog(1)  set to 1 i…

LittleBits Star Wars Droid and Swift Playgrounds

On the 1st September 2017, during 'Force Friday', LittleBits launched their new kit Star Wars Droid Inventor Kit an R2D2 shaped robot, though you are encouraged to customise it to form your own designs. It comes a number of tutorials, that take you through building a moving head, a proximity sensor to move away from you, and many others.


So confession time, I am not the target audience for this kit, but I have enjoyed playing with it. The tutorials take you through building and dismantling the kit, doing a range of different activities and in most cases controlling it remotely from an iPad. You can even record your voice and have it played back from the Droid, in my opinion, the wide of sounds is one of the things that lift this from being just a nice kit -  I will get onto the other one soon. Though good fun, I was left with a question can it be programmed?

This was my first time using a LittleBits kit I didn't know what the options were available for programming it, a quic…

my robot BETT2017

I will start with a confession, I only had about 2 1/2 hours at BETT 2017 due to external time pressures so to say I didn't yet a chance for a good (or even a bad) look around is an understatement; so I am not reviewing the show just a few notes on what I did manage to see.


STEAM Village
First and mostly, it was great to talk to so many people, only few I had met face to face previously, about robots, micro:bits, Raspberry Pis and coding. Most of this happen in the relatively small (compared to the event space) STEAM village and nearby stalls. It was great to see the strong presence of both Raspberry Pi and Micro:Bit Foundation, along the variety of different activities and example usage of both, with Code Club (I know it is part of Raspberry Pi Foundation) there was well. This was all alongside some other companies

Four of these stuck in my mind.

1. DFRobot (https://www.dfrobot.com/) with their range of Arduino-based robots and non-programmable kits. The two kits that caught my eye w…